# FAQ: What Does The Load Mean On A Computer Car Computer?

## What does load mean in a car?

The engine load basically determines the capacity of the engine to produce power. It is the force which resists the power produced by the engine. Every engine is designed for particular load called as rated load or maximum load at particular speed. Whenever the load on engine increases, the engine speed decreases.

## What is load on OBD?

Let’s define OBD II calculated load: Reaches 1 at full open throttle for any altitude, temperature and pressure or rpm for both naturally aspirated and boosted engines. Indicates percent of peak available torque. Linearly correlated with engine vacuum. Often used to schedule power enrichment.

Load Value means the dollar value to be loaded onto a Cardholder’s Account based on the Cardholder’s Disbursement amount, as determined by Client.

## What is engine load percentage?

Engine load % is normally a comparison of the actual engine output torque to the maximum engine output torque at the current engine operating speed.

## How does an engine calculate load?

LOAD_ABS = [air mass (g / intake stroke)] / [1.184 (g / intake stroke) * cylinder displacement in liters] Derivation: – air mass (g / intake stroke) = [total engine air mass (g/sec)] / [rpm (revs/min)* (1 min / 60 sec) * (1/2 # of cylinders (strokes / rev)] – LOAD_ABS = [air mass (g)/intake stroke] / [maximum air mass

You might be interested:  FAQ: How To Clean The Connectors On A Car Computer?

LOAD: Load can be thought of as the amount of air entering your engine at a certain engine speed. Load is an approximation of your motor’s torque output calculated using the the amount of airflow entering the motor, engine RPM, and a scaling constant.

## What should Calc load be at idle?

So, the baseline of our formula for calculated load at idle is 3.4 grams per second (current airflow) divided by 10.35 grams per second (max airflow) equals 33%. In the last column we saw that normal CL readings at idle could be between 30% and 50%.

## What is a calculated load?

The equivalent value of all the loads connected to a system is said to be calculated load. The power rating of loads differs for different applications. It is also defined as the estimated load for the nominal values. According to article NEC 220, the calculations for branch circuit, feeder, and service load are made.

Calculated Load Value — Indicates a percentage of peak available torque. Reaches 100% at wide open throttle at any altitude or RPM for both naturally aspirated and boosted engines. In which case, I would still expect it to return non-zero values when in neutral, as it’s not transmission load.

## How do I calculate load?

Compare the wattage of your air conditioner and furnace. Since you only use one at a time, add only the larger wattage rating to your equation. Divide the resulting number of watts by volts (most homes use 220 volts) to get the number of amps, or the electrical load.

You might be interested:  Question: How To Connect My Car Computer To My Pc?

## What should my engine load be?

Engine load is calculated by PCM as current airflow divided by max airflow for such engine speed (known for this engine). Always should be 100% for wide open throttle. The calculation formula depends on ambient air temperature but not very significantly.

## How do you calculate load value?

Use the formula for power: Power = Voltage x Current, or P = VI. If you are trying to calculate the minimum load and you happen to only know the power and voltage ratings of your power supply, you can use the formula P = V2/R, which can become R = V2/P.

## How is load percentage calculated?

The load factor percentage is derived by dividing the total kilowatt-hours (kWh) consumed in a designated period by the product of the maximum demand in kilowatts (kW) and the number of hours in the period. In the example below, the monthly kWh consumption is 36,000 and the peak demand is 100 kW.

## How engine speed is controlled?

Control of idle speed The engine RPM is monitored by the crankshaft position sensor which plays a primary role in the engine timing functions for fuel injection, spark events, and valve timing. Idle speed is controlled by a programmable throttle stop or an idle air bypass control stepper motor.

## What is absolute engine load?

Engine Load (Absolute) – Maximum engine load. Fuel Pressure – pressure given by the fuel pump. Fuel Rail Pressure – pressure within the fuel rail and which is given into the injectors.